MIL-P-80114D
Type I, sizes and capacities.
TABLE I.
For sizes 2 thru 10, the stated requirements for the press
NOTE:
size specified in 6.2 shall not be greater than the sizes and
capacities for the next larger size press shown in table I.
When a size 12 is specified, it shall not exceed the stated
requirements by more than 10 percent.
toler-
shall meet the alignment
3.9 Alignment tolerances. Each press
ances specified in 3.4.1 and 3.4.5.
3.10 Performance. Each press shall be capable of exerting a force of not
less than 110 percent of its rated tonnage at any point of the ram stroke and
shall also be capable of pressing or holding this force for not less than
three minutes.
3.10.1 Additional performance requirements. Performance features required
he requirements herein shall be as specified
in addition to, or in lieu of,
and fully described (see 6.2).
3.11 Standard equipment. All standard equipment normally provided with
the manufacturer's commercial press shall be furnished.
3.12 Optional equipment. Optional equipment shall
be furnished as
specified and fully described (see 6.2). The optional equipment provided
shall be functional without requiring modification of the equipment or
machine.
Required repair parts shall be furnished as specified
3.13 Repair parts.
(see 6.2).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business