MIL-P-80104D
4.7.3 Performance tests. Unless otherwise specified (see 6.2), the wire
rope diameter used for testing press sizes 1, 2 and 3 shall be 5/8 inches.
The wire rope diameter for testing press sizes 4, 5 and 6 shall be 1-3/8
i riches. The type fittings used for the test shall be as specified by the
procuring activity (see 6.2). One type fitting of stainless steel, one of the
aluminum, and one of carbon steel shall be selected for the test. After the
swaging operation, each swaged assembly shall be subjected to a pull
destruction test. In this test, the wire rope shall break without damage to
the fitting. All performance tests shall be completed without making any
adjustments to or performing any maintenance on the machine.
requiring
4.7.4 Electromagnetic interference control test. Equipment
electromagnetic Interference control shall be tested for compliance with 3.3.6
using the procedures given in MIL-STD-462.
4.8 Packaging inspection. packaging of each item shall be inspected to
determine compliance with the requirements of section 5.
PACKAGING
5.
5.1 packaging r equirements.
The requirments for packaging shall be in
accordance with MIL-M-18058.
6.
NOTES
(This section contains information of a general or explanatory nature that
may be helpful, but is not mandatory.)
6.1 Intended use.
The press is intended to swage metal fittings onto wire
rope.
6.2 Acqu isition requirements.
Acquisition documents should specify the
following:
a.
Title, number, and date of this specification.
b.
Size required (see 1.2).
c.
Issue of DODISS to be cited in the solicitation and, if
required, the specific issue of individual documents referenced
(see 2.1.1 and 2.2).
d.
First article, if required (see 3.1).
Specify system of units for measuring and indicating devices
e.
(See 3.2.1).
f.
Additional safety and health requirements, if required
(see 3.2.5).
Specify configuration of additional point-of-operation
g.
guarding, if required (see 3.2.5).
h.
Painting, if different (see 3.3.4.).
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business