MIL-P-80178B
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspections. Unless otherwise specified in
the
contract or purchase order, he contractor is responsible for the performance
specified herein. Except as - otherwise
of all inspection requirements
specified in the contract or purchase order, the contractor may use his own or
the performance of the
any other facilities suitable for
inspection
requirements specified herein, unless disapproved by the Government. The
Government reserves the right to perform any inspection set forth in the
specification where such inspections are deemed necessary to assure supplies
and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All Items shall meet all requirements
of sections 3 and 5. The inspections set forth in this specification shall
become a part of the contractor's overall inspection system or quality
program. The absence of any inspection requirements in the specification
shall not relieve the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance comply with
of the contract.
Sampling inspection,
as part of
all requirements
manufacturing operations, is an acceptable practice to ascertain conformance
to requirements, however, this does not authorize submission of known
defective material, either indicated or actual, nor does it commit the
Government to accept defective material.
4.2 Classification of inspections.
The inspection requirements specified
herein are classified as follows:
First article inspection (see 4.4).
a.
Quality conformance inspection (see 4.5).
b.
4.3 Inspection conditions. Unless otherwise specified (see 6.2), . all
inspections shall be performed in accordance with the test conditions
.
`specified in 4.7.1.
4.4 First article inspection. When a first article inspection is required,
it shall be applied to the first article submitted in accordance with 3.1.
Unless otherwise specified (see 6.2), first article inspection shall consist
of the examination in 4.6, and all tests in 4.7. The press shall pass the
first article examination and all tests to be accepted.
4.5 Quality conformance inspection. Quality conformance inspection shall
be applied to each press prior to being offered for acceptance under the
contract. Unless otherwise
specified
(see 6.2), quality conformance
inspection shall consist of the examination in 4.6, the tests in 4.7, and the
inspection in 4.3. The machine shall pass the examination, all tests, and the
inspection to be accepted.
4.6 Examination. Each press shall be examined to determine compliance with
all requirements of this specification.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business